what causes the srx headlight to be dim

LED lighting has the advantages of safety, reliability, environmental protection, etc., and has been widely used in diverse fields of order, which is conducive to promoting social progress and improving people'southward living standards. However, in order to meet the requirements of lighting quality and energy conservation, it is necessary to fully consider the problem of increasing the brightness of the lighting. At this stage, the brightness of LED lighting is mainly reflected in the insufficient application of scientific and technological means and the lack of brightness design solutions. It has non started to improve the efficiency of LED lighting equipment to ensure lighting quality. In particular, in the design of the lamp structure, there are nonetheless some LED lighting fixtures that are just considered from the internal component blueprint, ignoring the influence of the lamp's own structural characteristics on the lighting effulgence, which is the main reason for the disadvantage of LED applications. Lite-emitting diodes are a type of semiconductor device and have important applications in energy conservation and environmental protection. In order to give total play to the part of LED lighting, it is necessary to improve the brightness of the lighting, so as to provide people with a suitable lighting environment.

Contents

• What is LED light
• What causes the LED lights to dim
  • i. LED chip
  • 2. Quality of LED phosphors
  • 3. LED Packaging
    • Packaging Process Cloth-Silicone
  • 4. Bracket
  • 5. LED lights are dim due to improper maintenance
• How to make LED lights brighter
  • one. Ability current changes brightness
  • 2. Constant current drive
  • 3. The heat changes the brightness
• The relationship between chip size and heat dissipation
  • 1. Cooling method
  • two. LED light source changes effulgence
  • 3. Product safety guarantees brightness
• The significance and prospect of LED lighting brightness in apply
  • Related Posts

What is LED light

The LED lamp is a chip of electroluminescent semiconductor material. It is cured on the subclass with argent or white glue, and then the chip and the excursion lath are connected with argent or gold wires. The periphery is sealed with epoxy to protect the inner core Role, and finally install the shell, so the stupor resistance of LED lights is good.

What causes the LED lights to dim

The dimming of LED lights is actually the light disuse that we often say. The more the LED lights are used, the darker is because the LED lights will have a calorie-free disuse phenomenon. Low-cal attenuation is directly related to temperature, which is mainly determined past the fleck, phosphor and packaging engineering. Light decay is the main reason for the dimming of LED lights. The larger the lite decay, the faster the LED darkens, and it volition not light for a long time. The LED lamps are divided into three aspects: the driver, the chip and the axle. Low voltage is the main reason for dark.

i. LED chip

Chip: The quality of the chip determines the electro-optical conversion efficiency and the main reason that affects the light efficiency. The chip is the light emitting trunk of the LED lamp, then when the chip is damaged, the brightness of the LED lamp volition be weakened, which is what we call the concealment of the calorie-free, which will seriously crusade the entire LED lamp to be off. The apply of high-quality high-brightness chips reduces the lite decay from the root, the emitted low-cal is even and comfortable, more transparent and brighter, with a long service life and a three-yr warranty.

2. Quality of LED phosphors

Phosphor: The quantum efficiency of the phosphor (intuitively expressed equally effulgence). The higher the quantum efficiency, the higher the light efficiency of the LED device. Increasing the quantum efficiency of phosphors will usually be accompanied past an increment in particle size. The increase in particle size will cause serious sedimentation, which makes the LED device dispensing process difficult to control, and the yield is low. Bore and particle size distribution. The distribution of the phosphor in the silica gel has little upshot on the low-cal efficiency but has a more than significant effect on the light quality. For example, when the COB product uses a centrifugal method, the phosphor is deposited on the chip. On the rice: the uniformity of the lite is increased, but the phosphor the amount.

3. LED Packaging

Why do different packaging processes bear on the brightness of LED lights? 1 of the main reasons is that LED chips are afraid of heat. Occasionally, if information technology is heated for more than a hundred degrees in a brusk period of time, information technology does not affair. If you are afraid of being exposed to high temperatures for a long time, it is a not bad impairment to the LED flake. When the LED scrap is damaged, the brightness of the LED light volition exist weakened. The lights volition be dim or even off. For example, the data detected by a single white LED light on an aging board and the data detected when an LED white calorie-free is assembled into a lamp to age are definitely inconsistent. The magnitude of this divergence depends on the electric parameters of the LED during operation, the design of the luminaire, and the surround in which the luminaire is used. This is very important. The quality of LED white light tin can be said to be a very important factor. For example, the same is represented past the 14mil white light segment chip of the wafer, and the white LED light packaged with ordinary epoxy primer and white light glue and package mucilage is lit at thirty degrees. Later on 1000 hours, the attenuation data is 70% of the light attenuation :; if information technology is packaged with a low-grade D glue, the light decay is 45% in a thousand hours under the same aging environment; if it is packaged with a low-grade C glue, the same aging Nether the surroundings, the 1000-hour light decay is 12%: if the B-type low decay glue is packaged, the m-hour light decay is -3% under the same crumbling surroundings; if the A-blazon depression decay mucilage is, The hr light attenuation is -half dozen%. And so the quality of the packaging process determines the crusade of the brightness of the LED lamp.

Packaging Process Fabric-Silicone

The different light extraction rates of silica gel indirectly affect the low-cal efficiency due to the different refractive index. The higher the refractive alphabetize, the college the light extraction rate. In improver, the quality of similar gold wires, primers, and silvery glues will touch on the conductivity due to their effects on conductivity and thermal conductivity.

iv. Bracket

The textile of the bracket (such equally copper, silver, iron, etc.) affects heat dissipation and indirectly affects flake functioning and affects lite efficiency: the cloth of the reflector loving cup (such every bit PPA, Per centum, EMC, etc.), the flatness and thickness of the silver plated mirror bottom of the reflector cup affects lite Extraction rate. It won't low-cal up when used, which is as well due to the low-cal decay caused by the material of the bracket. This not only makes the LED light emitting effect is not proficient, the light is very dark, the low-cal decay time is shorter, and the caste is stronger.

five. LED lights are dim due to improper maintenance

The service life of LED lamps is not simply related to the quality of the lamps, but also to the maintenance of the lamps. The dust behind the LED lamps should be cleaned with a dry cloth or a ladle.

How to make LED lights brighter

one. Power current changes brightness

The brightness of the LED lite-emitting tube is related to the voltage direct applied to it. The higher the voltage, the greater the current flowing. The higher the brightness, the first requirement of the ability supply is high efficiency, high efficiency products, and low heat generation. Stability is leap to be high. Nevertheless, exceeding the rating will shorten the service life or even burn out. The brightness of the LED light depends on the operating current. The larger the electric current, the higher the brightness, only each LED has a rated operating current. For example, the working electric current of ordinary white small LED is about 25MA. If the electric current exceeds the rated value, it may lead to premature aging or damage of the LED. Each color of the LED lamp requires a voltage. If y'all desire to increase the brightness, do not increment the voltage. This is not a problem. After the voltage is applied, the specified voltage (for example, 3v) will definitely burn out. Effulgence must be increased through scientific principles. Brightness is calculated past power. The more power you need, the more power y'all have. The college the power, the higher the brightness and the lower the ability. Loftier ability and high effulgence.

ii. Constant electric current drive

If y'all desire to increase the brightness of the LED lamp, you tin can change the effulgence of the LED lamp by adjusting the resistance of the current sampling resistor in the driving circuit. The brightness of the LED lamp can exist changed by adjusting the resistance value of the resistor connected to the CS pin of the abiding current bulldoze device HV9910 as a current sampling resistor. Generally, reducing the resistance value of the resistor appropriately can improve the brightness of the LED lamp. On the contrary, increasing the resistance value can reduce the brightness of the LED lamp.

3. The rut changes the brightness

Whether the LED brightness and piece of work is stable and the quality is good, information technology is very important to misemploy heat from the lamp trunk itself. Thermal management is a major problem in high-brightness LED applications. Because the p-type doping of Iii-nitrides is limited by the solubility of the Mg acceptor and the higher activation free energy of the holes, heat is particularly easy in the lifetime of high-brightness LEDs in the p-type region. Fatal trouble with heat dissipation. By and large speaking, whether the LED lamp works stably and with good quality is very of import for the rut dissipation of the lamp body itself. At present, the oestrus dissipation of high-brightness LED lamps on the market oftentimes uses natural heat dissipation, and the effect is not ideal. The rut dissipation path of LED devices is mainly rut conduction and convection. The extremely depression thermal conductivity of the Sapphire substrate fabric increases the thermal resistance of the device, produces a serious self-heating effect, and has a devastating effect on the performance and reliability of the device. The event of heat on loftier-brightness LEDs. The heat is concentrated in a bit with a modest size, and the temperature of the fleck rises, causing non-uniform distribution of thermal stress, the chip's luminous efficiency, and the efficiency of the phosphor lasing. When the temperature exceeds a certain value, Device failure charge per unit increases exponentially.

The relationship between chip size and heat dissipation

The near straight way to increase the effulgence of ability LEDs is to increase the input power, and to forestall saturation of the active layer, the size of the pn junction must exist increased accordingly; increasing the input ability will necessarily increase the junction temperature, which in plough reduces the quantum efficiency. The increase in the power of a unmarried tube depends on the device's power to extract estrus from the pn junction. Under the existing chip material, structure, packaging procedure, constant current density on the chip, and equivalent estrus dissipation conditions, the size of the chip is increased separately. The temperature will continue rising. Strengthening the heat dissipation engineering of LED lamps, and introducing and radiating infrared radiation estrus to fluorescent lamps are important means to improve the service life of lamps. In the consideration of estrus dissipation, we separate the heat dissipation of the LED light source lamp chaplet and the heat dissipation of the power supply without interfering with each other, thereby ensuring the rationality of heat dissipation. Thereby ensuring the brightness of the LED.

Solution for heat dissipation of LED light bulbs: To solve the heat dissipation of LED light bulbs, it mainly starts from ii aspects. Before and after packaging, information technology can be understood as the heat dissipation of LED fries and LED light bulbs.

1. Cooling method

Aluminum estrus sink fins: This is the about common manner to dissipate heat. Aluminum rut sink fins are used every bit part of the case to increase heat dissipation expanse.

Thermally conductive plastic shell: filled with thermally conductive material during injection molding of the plastic beat out to increment the estrus and heat dissipation capacity of the plastic shell. Aerohydrodynamic heat dissipation: The aerodynamics uses the shape of the lamp housing to create convective air, which is the everyman price way to enhance rut dissipation. The fan lamp housing uses a long-life high-efficiency fan to enhance heat dissipation: low cost and adept issue. Notwithstanding, it is more than troublesome to change the fan, and information technology is not suitable for outdoor utilise. This design is relatively rare. Heat pipe oestrus dissipation technology: The oestrus pipage uses heat pipe engineering science to bear oestrus from the LED chip to the heat dissipation fins of the housing. This is a common design in large lite fixtures such as street lights. Surface radiation rut handling The surface of the lamp shell is treated with radiation oestrus dissipation: the simple matter is to apply the radiation rut-dissipating paint, which can take the heat away from the surface of the lamp shell past radiation.

two. LED light source changes brightness

LED calorie-free fixtures created past LED lite sources are equanimous of LEDs, heat dissipation structures, drivers, and lenses. Therefore, heat dissipation is also an important office. High-quality LED light sources are used. The chip is placed on the pins. The thermal energy is direct generated by the chip nodes through the silver feet. It comes out in the tropics, which is different from the traditional in-line products and traditional patch products in terms of heat dissipation. The node temperature of the chip will not accumulate, which ensures the skilful usability of the light source lamp beads and the length of the calorie-free source lamp beads. Long life and low light decay. Traditional patch products, although the positive and negative electrodes of the chip tin can be continued through the aureate wire of the chip, and the thermal energy generated by the chip is connected to the argent pin through the gilt wire. Both rut and electricity are conducted past money, and the heat aggregating time is long. Will straight affect the life of the LED fluorescent tube.

3. Production safety guarantees effulgence

During the production of LEDs, PC flame retardant plastic tubes are guaranteed to ensure that infrared rut tin penetrate the PC tubes. When nosotros blueprint and consider the employ of LED lamps, we can give more than consideration to their safety and use a fully plastic physical insulation method, fifty-fifty in use. Non-isolated power supply can also ensure the condom of the use of LED lights. This also guarantees an important reason for the brightness stability factor of the LED lamp.

The significance and prospect of LED lighting brightness in use

The era of LED lighting has begun. The marketplace is increasing at a rate of 130% every year. The most of import reason is that LED lamps are not environmentally friendly, similar free energy-saving lamps. They have no tribute, no toxic substances, and long life. (The theoretical life of LEDs is about 100,000 hours. With the advancement of LED lighting engineering science, the popularization of LED lights will slowly go, and the tide of replacing traditional lighting will inevitably be blocked. For LED lighting, many people volition inevitably cull traditional lighting and full general installation methods, and LED lighting has Relevant lighting standards, LED lighting should be implemented in accordance with relevant lighting standards in guild to make better use of the free energy-saving features of LED lighting. Implement the principle of illuminance, which should be high, high, low, and low. The vertical surface illuminance), the directionality and diffusivity of lighting light (including the three-dimensional sense of the production, the gloss and the texture of the product surface, etc.), the effulgence of the lighting source, and the colour (including color temperature and color rendering) have different requirements.

riverathince1953.blogspot.com

Source: https://tachyonlight.com/what-causes-the-led-lights-to-dim/

Share this post