How to Upload Your Horse Manip on Hee?

# FAQ - Frequently Asked Questions

# Product Questions

# What is Alogo Motility Pro used for?

Alogo Move Pro has a multitude of benefits: it allows you to follow your horse's progress and improve your performance; to have a amend understanding of your equus caballus and to adapt your training to its needs by finding the optimal parameters; to validate your sensations thanks to objective and precise data; to monitor your equus caballus's locomotion and anticipate injuries.

# How to use Alogo Motion Pro?

Simply turn on your Motility Pro by pressing the ON/OFF button for 3s, slide it into the sensor holder previously attached to your girth, kickoff recording from the ON/OFF push button or via the Alogo app and ride your equus caballus equally usual. At the end of your grooming session, open up the Alogo app to view your results directly on your phone.

# Is the Alive service included within the Move Pro sensor? To whom are each of these tools destined?

No, today the Live is a service for show organizers, while the Move Pro is a product for any rider who wants to measure their progress and to monitor their equus caballus's wellness.

# Is Alogo Movement Pro resistant?

Yep. We have designed Alogo Move Pro to be resistant to the extreme conditions of equestrian sports. The Move Pro is water, shocks, dust restistant as well equally loftier temperatures. In add-on, the case of our sensor holder and the girth with integrated example from Amerigo adds extra protection.

# Are there any risks for my horse?

Alogo Move Pro has been designed to respect the horse's natural movement and non to cause any discomfort.

# When volition Alogo Motility Pro be available?

Alogo Movement Pro is currently available for sale through our website or through our worldwide distributors.

# Practical questions

# Do I need to purchase a new girth?

No, you don't necessarily demand to buy a new girth. You can simply attach the Motion Pro to your own girth using the sensor holder that is included in your Alogo Movement Pro kit. However, for meliorate integration, we recommend that you lot use the Amerigo girth which was designed specifically for our product.

# How exercise I attach the sensor holder?

Position the sensor holder in the center of your girth. (It is very important that the sensor is in the eye of the girth for your balance information to be usable. Then environment your girth with the scratches on each side.

Attention: The sensor holder must be firmly attached to the girth and must non movement! Otherwise the collected information cannot be candy.

# Accept you identified any girth that are not uniform with the sensor holder?

The vast bulk of girth sold on the market are compatible with our sensor holder. Nevertheless, information technology is of import to utilize the right version of the sensor holder with the type of your girth, i.e. the "jumping" version for a stud girth and the "dressage" version for a dressage girth. Our tests revealed that the post-obit girths could prevent reliable data collection:

• Stübben Equi-Soft
• Cord girth

We recommend that you do not employ these girths with our sensor.

# Which way to put the sensor?

For the sessions to be recorded correctly, you must pay attending to the orientation of the sensor in the sensor holder case. The LED, the ON/OFF button and the USB plug must be on the left side of the horse. The marking "Ground" towards the ground, "HORSE" towards the horse and the arrows must betoken to the dorsum of the horse.

N.B.: Please be careful to pause or stop the recording in progress if you need to loosen the girth or if you wish to remove the sensor from the sensor holder in lodge non to misconstrue the motion information recorded during the session.

# Is the sensor holder uniform with whatever blazon of girths?

The sensor holder of Alogo Motility Pro has been designed to fit a wide range of girths. We offer two different versions:

• For stud girths - "Jumping" version
• For dressage girths - "Dressage" version

It may be that our sensor holder is not ideally suited for certain very particular girths. In case of dubiety, we advise you to contact usa before ordering.

# For which disciplines can I utilize Alogo Motility Pro?

Alogo Move Pro can exist used for jumping, dressage, outriding, apartment work, gymnastics and cross-country. We plan to implement new features regularly and to allow the assay of other disciplines at a later stage.

# Am I allowed to use Alogo Move Pro at national and international competitions?

Yes, most equestrian federations authorize the wearing of move sensors in competitions.

# Technical questions

# Is the awarding downloadable on all smartphones?

The majority of Apple tree devices running iOS fourteen are compatible with our sensor. However nosotros recommend that you always utilize the latest version of iOS. An Android version will be available later. If you accept whatever dubiousness, contact united states and we will inform you.

# Practise I have to have my smartphone with me to record a session?

Not at all! Alogo Move Pro has been designed so that y'all can still start and terminate recording your session without a smartphone. However, you volition need it to synchronize your data and display your results.

# If I change my smartphone, is the data recorded on my Alogo business relationship during my last sessions recoverable?

Yeah, all your sessions are saved into the cloud. All you lot need to practice is to log back into your account from your new device to retrieve them.

# Practise I need Wifi or an net connection to employ Alogo Motility Pro?

Alogo Move Pro can record your session without the demand of a Wifi coverage or an internet connection. Once your session is over, the Alogo awarding needs an internet connection (cellular or wifi) in order to synchronize and display the data on your smartphone.

# How oft should I recharge the bombardment?

Alogo Motility Pro has been designed to last up to xiv hours of continuous use. For a rider with a equus caballus that rides an boilerplate of ane hour a day, Alogo Move Pro can last 2 weeks without recharging. These values serve only as an indication. Please note that extreme temperature weather may affect the battery life.

# If I run out of battery during a session, is the beginning still recorded?

Yes, y'all will only demand to plug in your sensor to recover the battery so that you can transfer the recorded data to your App.

# I started the session from the App and my phone has run out of battery, did the sensor even so recorded the balance of the session?

Yes, to end the recording, press the ON/OFF button once on your Movement Pro.

# How long does information technology take to recharge the battery?

It takes 3h20 for the bombardment to fully charge. Nosotros recommend that y'all perform a total charge before the showtime use to calibrate the bombardment. To practise this, charge the Motility Pro overnight until the LED is off.

# How long can I record before my sensor memory is total?

You tin can record up to 10 hours with no limit on the number of sessions you can tape. However, the longer the recording takes, the longer it will have to synchronize on the App.

# Can I use Alogo Movement Pro on multiple horses?

You tin use Alogo Move Pro on an illimited number of horses.

# Is information technology possible to connect several sensors to the same phone?

Yes, you will be able to connect several sensors to a single account. You will so have to synchronize them one after the other.

# Do I have the possibility to block the tool myself in case of theft / loss?

It is not possible for you to locate your sensor directly from your application. In case of a merits, please contact united states of america.

# Reminder LED guide - Alogo Move Pro

# What does each LED color on my sensor correspond to?

Red LED:

• A few seconds at switch-on and switch-off, the sensor is switched on or off.
• If the red LED stays on, it means that the sensor retentiveness is full.

Pink LED:

• Which blinking quickly: the sensor is looking for a GPS satellite connection.
• Simple: GPS is connected.

Green LED:

• Blinking: Recording a current session.

Blue LED:

• Fast Blinking: Bluetooth connection to the sensor is available.
• Blinking: Sensor connected in Bluetooth.

Yellow LED:

• Blinking: the Move sensor is synchronizing your sessions with the smartphone.

White LED :

• Blinking: DFU manner, the update is prepare to be installed.

Bluish and reddish LED :

• Blinking alternately: Bluetooth connection has been lost. It continues for 30 seconds.

# Oft Users Questions

# I don't have the GPS path mapping or the speed indication after my session... why?

If you don't have the GPS path mapping view from your session, in that location are several possible reasons:

• You have ridden indoor (indoor riding loonshit, indoor competition, etc...). In this case, GPS technology cannot piece of work. This is a electric current limitation of GPS technology.
• The area in which y'all ride is not covered past a GPS signal or it is very weak.*

*: Nosotros want to provide you with high accurate data that you can use during your training sessions. A wrong track or a incorrect speed would lead to wrong conclusions. That is why, in rare cases we cannot show you this type of data.

Note: If yous are using the sensor in a new location or for the first time for more than than 36 hours, it may take a little longer for the sensor to discover the GPS signal of the place you lot are in. Nosotros recommend you to check and/or establish this connection earlier placing the sensor on the horse. Simply plough on the sensor and hold it in your hand outside, the logo "GROUND" facing to the heaven and wait for the LED to stop blinking. After almost one minute 30, the GPS will be continued.

# My sensor does non turn on anymore...

Connect your sensor to a power source to ensure that the bombardment level is sufficient. If the trouble persists, contact us. Do non attempt to detach the sensor yourself.

# My smartphone does not find my sensor...

Make sure your smartphone is close to the sensor. If the sensor is correctly on just your telephone still doesn't detect it, press the sensor button twice speedily to restart the device search.

# My sensor doesn't react anymore or I tin't turn information technology off...

It is possible that the sensor doesn't react anymore. To remedy this, please restart the sensor past inserting a metal pivot into the pigsty provided for this purpose (next to the USB plug). Y'all can as well "Reset" your sensor by pressing and holding the push button for 10 seconds when it'due south ON. Be careful, later on this manipulation the memory will exist erased!

# My sessions are not recorded...

Different cases tin be the cause of this:

• If the LED is red, yous probably accept no more than memory available. To free up space, download your sessions on the App.
• Did y'all started your session past clicking once on the ON/OFF push or via the Alogo app?

# My sessions are not downloading on my Alogo App...

When your sessions are downloading, please make certain that you do not lock your phone or information technology will interrupt the upload (limit from iOS). You tin can still use your smartphone while waiting for the synchronization to finish, only you lot must return to the Alogo app to complete information technology. If you put your telephone on a table, retrieve to leave the Alogo App open or reopen it (if our App is active, y'all will be able to leave your telephone down without fear that it will lock automatically).

# How exercise I synchronize my sensor sessions?

At the end of one or more sessions recorded manually with the sensor push, to sync your session on the Alogo App, just do the post-obit:

Plow on the bluetooth of your smartphone in order to connect your sensor to your phone. Connect to your Alogo App and go to the "Settings" tab and so "Sensor Management". Click on the name of your sensor. The sensor is connected when a blue LED blinks on it. Click ane more fourth dimension on your sensor's name in the app. Start the synchronization of the sessions recorded by the Move Pro while pressing "Sync sessions from sensor".

The synchronization will start directly later that. You will meet the progress of the download with a progress bar at the top of your screen. During the upload of your sessions to your app, a yellowish LED will wink on your sensor. It will turn blue again once it is finished.

While syncing sessions, please practise not lock your phone. You can go to other applications while waiting for the sync to cease but be careful to come up back to the app before it finishes loading. Ideally, you should go out the app open on an unlocked phone without touching it.

# My session has a status of "failed" or "in validation" ...

A session tin have a status of "failed" or "in validation" in the following cases:

• The sensor holder is loose or moves during the session
• Y'all take put your sensor upside down
• You have not used your sensor on a horse
• You have launched the recording and manipulated your sensor earlier fixing information technology on your horse.
• You forgot to plow off the registration when you tacked-off your horse.

Delight write to us at support@alogo-assay.ch

# My session is in indoor mode...

The sessions without GPS point or with a bad GPS coverage (usually when you ride indoors) doesn't display the following metrics: the speed, the length of your strides and jumps (replaced by the duration), the distance and the free energy. The other data collected remain available. You will then take access to all your trajectory, pinnacle of your strides and jumps also as the numerous balance and gait information provided by our high precision sensor. Please note that the trends practise not withal take into account sessions without GPS signal.

We are currently working on a new algorithm that will collect the aforementioned data for an indoor session equally an outdoor i. All your data collected without GPS signal will be automatically updated by this new algorithm. In order to speed up the availability of this new algorithm, it is important to continue collecting indoor data to improve our organization.

# My Alogo app is non working...

Bank check if you have enabled on your phone the use of mobile data, bluetooth and GPS when the App is active. To do this, yous can do the following:

• Become to your phone'south settings
• Scroll down and click on the Alogo App in the settings
• Allow dissimilar accesses.

# Will I have to take an additional subscription?

All the main features detailed in the following table such as GPS path mapping and leap and pace trajectories will remain completely costless and at your disposal. A subscription will exist required for those who wish to have access to boosted specific features. (More than information on future subscription packages to come).

# You lot will notice more than technical details and information on the use of the Move in its unser guide. If yous have whatsoever questions that are not answered in information technology, please do non hesitate to contact united states.

# Comparison with competitors sensors

	Move	Competitors
Precision (1 to iv cm)	Yes	No
HD GPS path mapping	Yes	No
Real trajectories in 3D of strides and jumps	Yes	No
Strides lengths	Yep	No
Work intensity	Yeah	Aye
Recording without smartphone	Aye	No
Ease of use	Yes	No
Detailed analysis of horse movement	Yes	No

# Alogo Move Pro sensor

# Master Information

Features	Sensor
Durée de la session	Motility
Total distance travelled	Move
Fourth dimension spent at each gait	Motility
Type of work separate past discipline	Motion
Work intensity analysis	Move
Boilerplate cadence at each gait	Motion
Total number of jumps	Move
Footstep number between jumps	Motility
Average pace length at each gait	Motion
Boilerplate stride length before and after the jumps	Move
Boilerplate stride tiptop at each gait	Move
Illustration of the boilerplate trajectory of strides at each gait	Motility
Average speed	Motion
Average lateral residual (roll) of a session	Move
Average angle (pitch) of jumps and strides at each gait	Motion
Boilerplate propulsion power of strides and jumps	Motility
The highest bound with its real total trajectory	Movement

# Detailed Data

Features	Sensor
GPS path mapping with footstep and speed display	Move Pro
Complete trajectory for each stride and jump	Move Pro
Length and pinnacle of each stride	Motion Pro
Length and top of each jump	Movement Pro
Angle of each step and jump	Move Pro
Instant speed at the obstruction	Movement Pro
Average speed between obstacles	Movement Pro
Instant speed for each stride	Move Pro
Straightness (yaw) for each stride and bound	Move Pro
Detailed lateral balance (coil) for the entire session	Move Pro
Propulsion ability for each stride and bound	Move Pro
Length and power of the pace before and afterward the jump	Move Pro
Footstep parameters between jumps	Motion Pro
Regularity of stride length betwixt ii jumps	Move Pro

# And more!

Nosotros will be adding more features and value-added services on a regular footing.

riverathince1953.blogspot.com

Source: https://alogo.io/docs/en/faq/

Share this post